v=spf1 include:zcsend.net ~all
top of page


Ultra-Precision, Meter-Class Centering Station for the Alignment & Inspection

of Larger Diameter, Long Radius Optics

The LAS-XUP-VIS™ is a meter-sized, non-contact lens alignment and inspection station designed from the ground-up for precision lens centration and tilt measurements of single element, doublet, triplet and multi-element lens assemblies with radius ranging from +/- 1 mm to infinity (plano) and diameters from below 1 mm to 1000 mm, including spherical, aspheric, cylindrical and parabolic surfaces. All this can be done with a single objective lens allowing for fast and easy measurement. 

The core measurement technology is based on focused laser reflection (see LAS Technology). A single-mode optical fiber couples the external Laser Generation Module (LGM) to the on-tool vertically-mounted Optical Module (OM) which houses the focusing optics and large-format array camera(s). Software control of the LGM permits fast switching of wavelengths and optimization of the beam power, resulting in superior imaging of the reflected beam with sub-micron measurement precision. The design of the LGM permits up to two of three visible wavelengths (blue, green & red). 

The user friendly CalcuLens™ Assembly software is standard to all LAS™ models and enables computer automated measurement of the alignment errors of a single lens for rapid bottom-up assembly. Extending the measurement to multi-element lens assemblies requires the optional CalcuLens™ Inspection software thereby adding powerful inspection capability for the quality assurance of finished lens assemblies. The recent addition of CalcuSurf-1D™ USB lever probe and profiling software to the LAS™ family of products significantly aids the ease and precision of initial setup, resulting in improved utilization during frequent lens assembly changes. 


  • Centering of single large diameter, long radius lenses & mirrors

  • Cementing large diameter doublets & triplets

  • Centering & bonding of large diameter multi-element lens & mirror assemblies

  • Alignment Inspection of large-diameter multi-lens assemblies (requires CalcuLens Inspection)

  • Measurement of lens vertex height and air gaps (requires CalcuLens Vertex)

  • Measurement of lens Radius of Curvature (requires CalcuLens ROC)

  • Measurement of lens and assembly beam deviation (requires CalcuLens BD)

  • TIR profiling of rotationally symmetric housings and cells (requires CalcuSurf-1D)


  • Cored granite column and table resulting in stiff metrology loop with low thermal sensitivity

  • State-of-the-art Optical Module design optimized for exceptionally high tilt/centration sensitivity at very long radius of curvature (ROC = 1000 mm to infinity)

  • Measurement of larger diameter lenses and assemblies (300 mm ≤ ø ≤ 600 mm)

  • High-precision (< 50 nm runout) ø600 mm to ø800 mm encoded rotary air bearing with integrated centration/tilt stage and vacuum through center

  • Precision, motorized & encoded vertical linear stage (travel 2000 mm) with nanometer interferometric mapping for micron-level position accuracy

  • High-power green (520 nm) laser, fiber coupled to Optical Module

  • Large-format, small-pixel CMOS camera provides highest sensitivity to small TIR

  • 90 mm Working Distance (WD) objective lens with quick-attached thread for accessories

  • Custom objective for measuring alignment of mirror with holes (i.e., Cassegrain) 

  • User-friendly CalcuLens™ Assembly software and data reporting functions conforming to ISO standards

  • 0.1 µm centration accuracy



  • Red (660 nm) or Blue (460 nm) laser

  • Extended vertical focusing travel to 3000 mm

  • High-precision (< 50 nm runout) ø800 mm encoded rotary air bearing with integrated centration/tilt stage and vacuum through center

  • Add motorized direct drive to manual rotary air bearing

  • Extended worktable diameters Ø800 mm – Ø1000 mm 

  • 20 mm, 30 mm, 40 mm, 150 mm & 200 mm Working Distance objective lens adapters

  • Glue dispensing and UV cure stations

  • Reticle alignment accessory

  • CalcuLens Inspection software for measuring alignment of multi-lens assemblies

  • CalcuLens Vertex software for measurement of lens vertex height of tall lens assemblies and lens thickness and air space of shorter assemblies

  • CalcuLens ROC software for measurement of lens radius of curvature

  • CalcuLens BD software for measurement of lens boresight/beam deviation

  • CalcuSurf-1D precision USB lever probe with digital gage and real-time profiling software 

  • DMI-200 Low-coherence Distance Measurement Interferometer for center thickness and air space measurement of tall lens assemblies

  • 3D-SPM Surface Profiling Module for LAS

  • ROTOwand for vacuum lens pick-up & handling


LAS-XUP-VIS chart.jpg
bottom of page